Nemesis V2 Frame Kit
£44.99
The Halo RC Nemesis V2 has arrived, and our most popular frame just got a whole lot better.
The Nemesis V2 arms can be interchanged with the Nimrod arms, for those who want to run the skinny 5mm thick arms for maximum airflow while running a 4 in 1 ESC.
Sorry, no build guide available for this frame at this time.
Please check out the YouTube videos linked at the bottom of this page.
Frame Overview
The 'Halo RC Nemesis V2' has arrived, and our most popular frame just got a whole lot better. This awesome race frame has many different configurations, with the ability to modify and create the TPU mounts to suit almost every component choice.
We have taken all the suggestions (...and complaints) about the V1 and spent over a year redeveloping the Nemesis into the ultimate FPV race frame.
The TPU camera mount has been designed to take most of the current sizes of micro fpv camera's and lens's..
By using the 2 mounting holes you can adjust the position of the FPV camera to provide the best protection while keeping the TPU out of view.
The vertical plates are held in place be the top, middle and bottom plates to help distribute the impact forces better without breaking the carbon.
As standard, the Nemesis V2 comes with wide 4mm thick arms that are designed for running seperate ESC's. However, the skinny 5mm thick Nimrod arms can be swapped out and used for running a 4 in 1 ESC.
Frame kits can be purchased with your choice of Nimrod (skinny) 5mm arms, or Nemesis V2 (wide) 4mm arms. Both of which are available in True X and Stretch X configurations.
We treat the arms and the way they connect as the chassis of the frame, and this is the major part that affects flight characteristics and durability.
Our tried and tested design splits the arms where they meet each other, rather than them meeting in the centre of the frame. Inspired by the monocock chassis of formula one car, this design distributes the impact forces throughout the whole frame to reduce stress and protect the components within.
The latest revision of this arm connection method now only requires you to remove one bolt and loosen the second to remove and replace an arm when it breaks.
The Nemesis V2 top plate has been designed for running top mounted battery horizontal (toilet tank style) and there are slots for fitting a lipo strap and a hole for running the lipo lead up to the battery.
We have developed a range of TPU mounts for all the various direct to vtx style antenna's such as the Lumineer Axii and VAS Minion, along with a standard SMA mount that works for both the TBS Unify connector and the standard one.
The extra slots and holes should be enough for mounting components and RX antenna's with zip ties.