NAKED BMPCC 4K
£1699.99

Please read the 'Kit Overview' before placing your order.
Blackmagic 4K MUST be on firmware version 6.9.6 or earlier.
Currently only available from our UK warehouse, US customers switch warehouse.

The HaloRC Naked BMPCC4K Kit is designed to reduce the weight and change the form factor of the very popular Blackmagic Design Pocket Cinema Camera 4K. This makes it a lot easier to mount to an FPV drone and the huge reduction in weight results in better flight perfomance and efficiency.

Kit Overview

The HaloRC Naked BMPCC4K is the first of our Professional lineup of products. We have taken the widely used BMPCC4K and stripped it back to its bare bones to create the Naked BMPCC4K. Weighing in at just 410g making a massive weight saving of over 400g!

By reducing the weight and changing the form factor, we have created the ultimate cinematography camera setup for a drone. Increased flight times and reduced overall weight and size makes the Naked BMPCC4K perfect for many filming applications.

Available as a 'Full Kit' which includes all the parts required to convert your own camera, a 'Kit and Build' option for those who already have a camera and want to send it to us to convert for you, and we also offer a 'Ready To Film' option where we have sourced the camera, converted it and set it all up ready to film.

Kit Only

Includes all the parts required to convert your own Blackmagic camera into a Naked BMPCC.

£249.99
Kit & Build

Send us your camera and we will convert and set it all up for you.

£699.99
Ready To Film

We provide the camera and supply you with a 'Ready To Film' setup (lens not included).

£1699.99

The Blackmagic 4K is a perfect camera for stripping down and making naked due to it only requiring the main PCB, a small Bluetooth module and the camera sensor to run.

The main PCB and Bluetooth module are mounted between two carbon fiber plates keeping them safe and secure, while providing 90x124 AlphaGel mounting points for securing the camera to your frame. This mounting pattern is used by all frames designed for all naked BMPCC cameras, and is the industry standard.

High levels of precision are required to align the camera sensor with the lens and focus properly. So we have designed and printed our sensor case using SLA resin printing. This results in levels of detail and tollerences that cannot be achieved with FDM printed parts and a finish only match by injection moulding.

Our sensor case has been designed to work with all the other naked setups currently on the market, so if you already have one, you can upgrade to our sensor case and keep using your own mounting sollution.


With such a large platform provided by the plates that house the main PCB, it makes sense to mount the sensor case to the front of the top plate, and mount your lipo behind it for even weight distribution. The length of flex cable that connects the PCB to the sensor also defines where the sensor and lens can be mounted.

We created our own unique mounting sollution for the sensor case that uses front mounted strut braces. These are secured to the sides of the top plate using tough resin mounting points, and provide an adjustable mounting sollution for the case that goes from negative 20 degrees all the way back to 50 degrees.

Running along the top of the strut brace is a series of markers set at 10 degree increments making it simple to repeat frequently flown camera angles. The 0 degree marker has a slightly different marker to easily identify the centre point.


By using strut braces mounted to the front we have free'd up all the space behind the sensor case for easy access to your lipos and straps. It has also allowed us to offer three different lipo mounting configurations that use two straps per lipo that are held in place by the top plate.

You can run the standard single lipo in the centre, or for extra capacity or cell count you can run two lipos side by side. When running more extreme camera angles of over 30 degrees, you will find that the space for your lipo is reduced. To combat this we added a third, sideways/toilet tank, lipo mounting point at the back of the top plate allowing you to get the angle all the way back and not hit the lipo.

You may have also noticed the two holes at the back of the top plate, these are for mounting additional accesories such as cold shoe mounts, GPS, antenae etc.


The final feature of the HaloRC Naked BMPCC4K is our BMPCC Control Board. This control board is used to start and stop the recording and to turn the camera on and off. The control board is also used to supply direct power to the camera, and has a green led indicator to let you know when the camera is powered up.

We have also added pads so that you can connect the camera to your flight controller, and start and stop recording using your transmitter. You can also add an additional record button and mount it where it's most convenient to you.

We are working hard on a bunch of optional accesories that can be added to your setup to suit your own needs.


Premium MFT
Laowa 7.5mm F2.8
152g

Budget MFT
SLR Magic 8mm F4.0
110g*

Premium EF
Laowa 12mm F2.8
609g*

Budget EF
Tonika 8mm F2.8
557g

Premium Sony E
Laowa 9mm F2.8
200g

Budget Sony E
Samyang 12mm F2.0
254g*

Blackmagic Pocket Cinema Camera 4K
742g

894g
852g
-
-
-
-

HaloRC Naked BMPCC 4K
410g

562g
520g
-
-
-
-

Blackmagic Pocket Cinema Camera 6K
973g

-
-
1582g
1530g
-
-

HaloRC Naked BMPCC 6K-E
420g

-
-
-
-
620g
674g

*weight provided from manufacturer's website